Aqua Flo 475QC-4 4 Stage Quick-Change Reverse Osmosis Filter System (#475QC-4)

Description, Features & Benefits

The Aqua Flo 475QC-4 quick change 4 stage reverse osmosis filtration system has an innovative design for ultimate ease of operation. Filter replacement can be done in literally a couple of minutes without any tools and wihout even turning the water supply off! Just a quick quarter turn to remove the old filter, and a quarter twist to lock in the new cartridge. It doesn't get any easier! At the same time, the Aqua Flo 475QC-4 quick change 4 stage reverse osmosis (RO) system has all of the other features that you would expect in a quality RO system including sediment pre-filter, pre and post activated carbon filters, a thin film composite (TFC) RO membrane, chrome faucet, storage tank and complete installation kit.

Specifications & Operating Conditions - Aqua Flo 4 Stage RO System

Stages and Specifications
Stage 1: Sediment Pre-Filter	Aqua Flo Blue (#65010086) 5 Micron Sediment Filter Replace every 3 - 6 months - Traps silt/dust, rust and sand which may affect the taste and look of your water, while at the same time protecting the other filters from premature fouling.
Stage 2: Carbon Pre-Filter	Aqua Flo Purple (#65010088) 10 Micron Coconut Carbon Cartridge Replace every 3 - 6 months - Reduces chlorine, organochlorine compounds, chlorination disinfection byproducts (THMs and HAs), many VOCs and more.
Stage 3: 75 GPD Reverse Osmosis Membrane	Aqua Flo 75 GPD Reverse Osmosis Membrane
Stage 2: Carbon Post-Filter	Aqua Flo Purple (#65010088) 10 Micron Coconut Carbon Cartridge Replace every 3 - 6 months - Reduces chlorine, organochlorine compounds, chlorination disinfection byproducts (THMs and HAs), many VOCs and more.

This system is designed for use on all chlorinated and non-chlorinated potable water supplies. It is an excellent choice for most homes. If you do not receive your water from a municipal water system (you get your water from a well, lake or other non-treated source), you should have your water tested to ensure it is biologically safe (free of bacteria, viruses, and other harmful microorganisms) before using a reverse osmosis filter as your only water treatment. If your water is biologically contaminated, you should consider a point-of-use or whole-house ultraviolet purifier in addition to your reverse osmosis unit to kill any remaining microorganisms.

Recommended Source Water Parameters:

Maximum TDS: 2000 ppm Hardness: < 7 gpg Iron (Fe): < 0.2 ppm (mg/L)
Manganese (MN): < 0.05 ppm
Hydrogen Sulfide: 0.0 ppm
Turbidity: < 1.0 NTU
Feed Water Pressure: 40-100 PSI
Temperature: 40-100F (4-38C)
pH Range: 3-11

Note: The contaminants or other substances removed or reduced by this water treatment device are not necessarily present in your water.

Replacement Parts and Popular Accessories

Aqua Flo 4 Stage RO Installation, Manuals & Resources

The Aqua Flo 4 stage reverse osmosis system mounts under your sink, out of sight. Water supply is gained by attaching a simple adapter to your cold water supply pipe (copper or plastic). You will have to drill a hole in your countertop or sink frame to attach the faucet. It is a relatively easy do-it-yourself project, or if you prefer, you can have it installed by a handyman or plumber. The unit includes all installation hardware and a complete installation guide.
Aqua Flo 475QC-4 RO Filter Installation
and Owners Manual

Aqua Flo 475QC-4 4 Stage Quick-Change Reverse Osmosis Filter (#475QC-4) Reviews

There are currently no reviews for this product.
Be the first to write a review.

Aqua Flo 475QC-4 4 Stage Quick-Change Reverse Osmosis Filter (#475QC-4) Customer Questions & Answers

No customer questions have been submitted for this. Have a question? Ask it above.