Brio Pure Balance 6-Stage RO with Re-Mineralizing Filter
(URO6PURBAL)

Description, Features & Benefits

The Brio Pure Balance is an innovative 6-stage under sink reverse osmosis drinking water treatment system featuring a re-mineralizing filter that ads enriching minerals including calcium and magnesium back to the treated water, and neutralizes pH.

Key Features:

• Re-mineralizing and pH neutralizing post-filter
• Reasonable price
• Made in the European Union
• Brio 75 GPD Thin Film Composite (TFC) RO membrane
• Housings are manufactured from food-grade virgin polypropylene
• Coconut shell activated carbon cartridges
• Convenient place for wrench storage
• ISO 9001:2008 certified quality management system

For more information of the removal/reduction of various contaminants by carbon filtration and reverse osmosis, please CLICK HERE.

---

FREE BONUS: Flowlok Leak Protector

The FLOWLOK Leak Detector is an innovative device that installs right below your water filtration system in minutes. No special tools are required and it does not need electricity to operate. FLOWLOK Leak Detectors utilize a highly compressed safety disc that expands when it absorbs water. Once the safety disc has detected water it expands and trips the FLOWLOK safety lever to shut off the water entering the water filtration device. Safety discs are replaceable and are economical.

Specifications & Operating Conditions - Brio Pure Balance 6-Stage RO System

Ecosoft 6-Stage RO System Filters and Specifications
Stage 1: Sediment Pre-Filter	Brio 5 Micron melt blown polypropylene sediment filter Replace every 6 months - Traps silt/dust, rust and sand which may affect the taste and look of your water, while at the same time protecting the other filters from premature fouling.
Stage 2: GAC Coconut Shell Carbon Filter	Brio GAC Coconut shell carbon cartridge Granular Activated Coconut Carbon Replace every 6 months - Reduces chlorine, organochlorine compounds, chlorination disinfection byproducts (THMs and HAs), many VOCs and more.
Stage 3: Carbon Block Filter	Brio Carbon Block Filter Replace every 6 months - Improves the taste and smell of your water and further reduces chlorine, organochlorine compounds, chlorination disinfection byproducts (THMs and HAs), many VOCs and more.
Stage 4: Reverse Osmosis Membrane	Brio 75GPD membrane 75 Gallon Per Day Thin Film Composite (TFC) Replace every 2-3 years - Removes 99.8% of mineral and inorganic impurities.
Stage 5: Carbon Post Filter	Brio Coconut Carbon Post Filter Replace every 6 months - Improves the taste and smell of your water by removing a wide range or organic compounds.
Stage 6: Re-mineralization Filter	Brio Re-mineralizing Filter Replace every 6 months - Enriches the water with healthy essential minerals including calcium and magnesium, while also neutralizing pH.
Self-Cleaning:	This system uses a process of crossflow to constantly clean the membrane to prevent pre-mature fouling and clogging.

This system is designed for use on all chlorinated and non-chlorinated potable water supplies. It is an excellent choice for most homes. If you do not receive your water from a municipal water system (you get your water from a well, lake or other non-treated source), you should have your water tested to ensure it is biologically safe (free of bacteria, viruses, and other harmful microorganisms) before using a reverse osmosis filter as your only water treatment. If your water is biologically contaminated, you should consider a point-of-use or whole-house ultraviolet purifier in addition to your reverse osmosis unit to kill any remaining microorganisms.

Recommended Source Water Parameters:

Pressure: 40-100 PSI (2.7-6.9 bar)
Temperature: 40-100F (4-38C)
pH: 3-11
TDS Level: less than 2000 ppm (mg/L)
Turbidity: less than 11.0 NTU
Hardness(CaCO3):<10 GPG (170 mg/L)
Iron (Fe): <0.1 ppm (mg/L)
Manganese (Mn): <0.05 ppm (mg/L)
Hydrogen Sulfide (H2S): 0.01 ppm (mg/L)
Residual Chlorine: <2.0 ppm (mg/L)
Note: this product is not available in the State of California. CLICK HERE for more information.

Note: The contaminants or other substances removed or reduced by this water treatment device are not necessarily present in your water.

Replacement Parts and Popular Accessories

Brio 6-Stage RO System Installation, Manuals & Resources

The filtration unit and storage tank mount under your sink, out of sight. Water supply is gained by attaching a simple adapter to your cold water supply pipe (copper or plastic). You will have to drill a hole in your countertop or sink frame to attach the attractive long-reach faucet. It is a relatively easy do-it-yourself project, or if you prefer, you can have it installed by a handyman or plumber. The unit includes all installation hardware and a complete installation guide.

Brio Pure Balance 6-Stage RO w/ Re-Mineralizing Filter Reviews

There are currently no reviews for this product.
Be the first to write a review.

Brio 6-Stage RO System Manufacturer's Warranty

Brio warrants to the original owner (under normal use) to be free from defects in material and/or workmanship for one (1) year from the date of purchase.