Discontinued
Pentek CEP-10E Water Filter - Case of 12 | The Pentek CEP-10E Water Filter - Case of 12 has been discontinued. For an alternative product please see the Hydronix CB-25-1005. |
Pentek CEP-10E Filter
Also branded as: Pentek CEP-10E / Ametek CEP-10E / Culligan CEP-10E / Kleen Plus CEP-10E / Plymouth Products CEP-10E / Pentair CEP-10E / American Plumber CEP-10E / Bruner CEP-10E / US Filter CEP-10E
This item has been discontinued by the manufacturer. A comparible filter is the Hydronix CB-25-1005, which offers a Lower Price and the Same Coconut Shell Carbon.
CEP-10E cartridges are manufactured from an acid-washed coconut-carbon based formulation that minimizes the pH rise and produces better tasting water. The patented manufacturing process yields a cartridge with a nominal 5- micron filtration rating, low extractables and a minimal pH rise ideal for RO pre- and post-filter applications. A thin-wall, high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. These cartridges are protected by Endurawrap™, a uniquely formulated polyolefin bilaminate prefilter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.
- Nominal 5-micron rating*
- Acid-washed coconut-carbon formulation
- Bad taste & odor and chlorine taste & odor reduction*
- Low extractables, minimal pH rise for RO pre- and post-filter applications*
- Enhanced dirt holding capacity*
| Specifications | |
|---|---|
| Part #: | 15571443 |
| Micron Rating:* | 5 |
| Dimensions: | 2 7/8" x 9 3/4" (73mm x 248mm) |
| # Per Case | 12 |
| GTIN: | 00051678714430 |
* Based on Manufacturer's internal testing.
|
Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only. |
