Dow Filmtec BW30-PRO-400/34 Reverse Osmosis (RO) Membrane
11,000 GPD industrial / commercial replacement reverse osmosis (RO) membrane element
Filmtec BW30-PRO-400/34 Durable High Productivity, High Rejection Brackish Water RO Element. The Filmtec BW30-PRO-400/34 element is the ultimate element for durable, high-rejection, high-productivity performance in high fouling or challenging feed conditions, enabling trouble-free operation and a low cost of water.
- Features a 34 mil feed spacer to lessen the impact of fouling on pressure drop across a vessel and enhance cleaning effectiveness.
- Offers the proven performance and high productivity of the Filmtec BW30 membrane
- Delivers a lower total cost of water by enabling lower capital and/or operating expenses compared to 365 sq. ft. elements.
|
|
||||||||||||||||||||||||
*Permeate flow and salt rejection based on the following standard conditions: 2,000 ppm NaCl, 225 psi (15.5 bar), 77F (25C), pH 8 and 15% recovery. Flow rates for individual elements may vary but will be no more than 7% below the value shown.
**Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure. Most RO systems have carbon pre-filters for this purpose.
***Maximum temperature for continuous operation above pH 10 is 95F (35C).
Note: Active surface area guaranteed +/-5%. Active area as stated by FilmTec is not comparable to nominal membrane area often stated by some manufacturers.
Dimensions:
|
A: 40.0" (1,016mm) C: 7.9" (201mm) D: 1.125"ID (29mm) |
 |
| Model | Diameter Inches | Length Inches | Active Surface Area ft2 (m2) |
Test Pressure | Permeate Flow Capacity GPD (m3/day) |
Price (w/ Free Shipping) |
|---|---|---|---|---|---|---|
| Filmtec BW30-PRO-400/34 Our Stock #703248151 Dow Part #248151 |
8.0 | 40 | 400 (37) | 225 psi | 10,500 (40) |
Notice: The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the complete system design and on the operation and maintenance of the system.
