Greensand Plus™
Inversand Greensand Plus | List Price: US$ Our Price: US$169.00 You save: $42.00 In order to reduce shipping costs media orders may be split into multiple boxes and ship in clear plastic bags instead of the original packaging. Bulk quantity discounts available. For bulk quantities, please call 1-866-376-2690 for quote. Write a review. Found a Lower Price? Request a Price Beat |
|
direct replacement for manganese greensand with a number of advantages
Inversand's Greensand Plus™ is modern version of manganese greensand where a manganese dioxide coating is applied to silica sand. It is effective at higher operating temperatures and over higher pressure differentials than traditional manganese greensand. This allows for longer run times between backwashes.
In recent years, modern media choices like Filox, Katalox Light®, and Birm® have surpassed manganese greensand in popularity. This is largely due to the fact that manganese greensand requires periodic or continuous regeneration with potassium permanganate ("Pot-Perm"), whereas these modern media do not. Like manganese greensand, it is recommended that Greensand Plus™ be either intermittently or continuously (recommended) regenerated. However, regeneration is generally done with chlorine (sodium hypochlorite) instead of potassium permanganate. See the manufacturer's specification sheet below for details.
Since Filox and Katalox Light® have become available to us, we have found little or no need to continue using manganese greensand or Greensand Plus™ in new systems as these alternative medias do not require chemical regeneration and are capable of treating similar or even higher levels of iron, manganese, and hydrogen sulfide (rotten egg odor) as manganese greensand. However, we do find that many customers with existing manganese greensand systems would prefer to re-bed their existing systems with manganese greensand or Greensand Plus™ than switch to an alternative media.
- proven technology
- concurrent treatment of iron, manganese and hydrogen sulfide (rotten egg odor)
- effective over wide pH range
- ANSI/NSF 61 validated (by WQA)
- high tolerance of oxidizers such as chlorine
| Operating Conditions / Requirements: | |||||||
|---|---|---|---|---|---|---|---|
| Service Flow Rate: | 2-6 GPM/ft2 (8-12 GPM/ft2 short term) | ||||||
| Flow Direction: | Downward Flow | ||||||
| Typical Pressure Drop: | <3 psi | ||||||
| Backwash Flow Rate: | 10-14 GPM/ft2 | ||||||
| Typical Freeboard: | 40% | ||||||
| Minimum Bed Depth: | 30 Inches | ||||||
| Recommended Bed Depth: | 30 to 36 Inches | ||||||
| Maximum Feed Temperature: | 100F | ||||||
| Recommended pH: | 6.2 to 8.5 | ||||||
| Weight: | 88 lbs per Ft3 | ||||||
| Recommended Configurations for Residential and Light Commercial Applications | |||||||
|---|---|---|---|---|---|---|---|
| Tank Size: |
8 x 44 | 9 x 48 | 10 x 54 | 12 x 52 | 13 x 54 | 14 x 65 | 16 x 65 |
| Greensand Plus™ Volume (Cubic Feet): |
0.75 | 1.0 | 1.5 | 2.0 | 2.5 | 3.5 | 4.5 |
| Bed Depth (Inches): |
26* | 27* | 33 | 30 | 32 | 39 | 39 |
| Rec. Service Flow Rate (GPM): |
1.7 | 2.2 | 2.7 | 3.9 | 4.6 | 5.3 | 7.0 |
| Maximum Rec. Flow Rate (GPM): |
4.2 | 5.3 | 6.5 | 9.4 | 11.1 | 12.8 | 16.8 |
| Backwash Flow Rate @ 40F (GPM): |
3.5 | 4.5 | 5.5 | 8.0 | 10.0 | 12.0 | 15.0 |
| Backwash Flow Rate @ 70F (GPM): |
5.0 | 6.0 | 8.0 | 10.0 | 12.0 | 15.0 | 20.0 |
* Bed Depth not optimal due to tank height.
Katalox Light® is a registered trademark of Watch Water.
Birm® is a federally registered trademark of Clack Corporation.
Greensand Plus™ is a trademark of Inversand Company.
