Hydronix CB Series Carbon Block Filter
Formerly Liquatec CB Series
Hydronix CB SERIES CARBON BLOCKS are manufactured with high purity Coconut Shell activated carbon. Available in a wide range of lengths, diameters, and micron ratings our Liquatec blocks provide an exceptional cost-to-performance value. With high chlorine reduction, great dirt-holding capacity, and greatly reduced carbon fines, you will soon make the CB series your carbon block of choice.
Hydronix CB SERIES CARBON BLOCKS are ideal for point-of-use (POU) and Reverse Osmosis applications. These cartridges can be used in a wide range of applications such as residential, food service, commercial, and industrial. The CB Series carbon blocks are great for displacing traditional GAC (Granular Activated Carbon) and PAC (Powdered Activated Carbon) filters in application where high chlorine reduction is needed. Because of your overall lower cost, our CB Series are able to compete with virtually all carbon blocks manufactured in the USA.
- Reduce taste/odor/chlorine and certain VOC's from drinking water*
- Great chlorine removal capacity competitive with the finest carbon blocks*
- Nominal 0.5, 1, 5, and 10 micron Available
 |
 |
Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only. |
 If you find a lower advertised price, we will beat it by 5% of the difference |
 |
 |
||||
| Model | Micron Rating* | Dimensions | PSI change at flow rate |
# per case |
Buy individually | Buy a Case |
|---|---|---|---|---|---|---|
| Hydronix CB-25-1001 Part #149251001 Formerly: Liquatec CB-250-975-01 |
1 | 2 1/2" x 9 7/8" |
4 psi @ 0.75 gpm |
20 | Not Available | |
| Hydronix CB-25-1005 Part #149251005 Formerly: Liquatec CB-250-975-05 |
5 | 2 1/2" x 9 7/8" |
2 psi @ 1.0 gpm |
20 | ||
| Hydronix CB-25-1010 Part #149251010 Formerly: Liquatec CB-250-975-10 |
10 | 2 1/2" x 9 7/8" |
2 psi @ 1.0 gpm |
20 | ||
| Hydronix CB-25-2001 Part #149252001 Formerly: Liquatec CB-250-20-01 |
1 | 2 1/2" x 20" |
4 psi @ 1.5 gpm |
20 | Not Available | |
| Hydronix CB-25-2005 Part #149252005 Formerly: Liquatec CB-250-20-05 |
5 | 2 1/2" x 20" |
2 psi @ 2.0 gpm |
20 | Not Available | |
| Hydronix CB-25-2010 Part #149252010 Formerly: Liquatec CB-250-20-10 |
10 | 2 1/2" x 20" |
2 psi @ 2.0 gpm |
20 | Not Available | |
| Hydronix CB-45-1001 Part #149451001 Formerly: Liquatec CB-450-975-01 |
1 | 4 1/2" x 9 7/8" |
7 psi @ 2.5 gpm |
9 | ||
| Hydronix CB-45-1005 Part #149451005 Formerly: Liquatec CB-450-975-05 |
5 | 4 1/2" x 9 7/8" |
4 psi @ 3.5 gpm |
9 | ||
| Hydronix CB-45-1010 Part #149451010 Formerly: Liquatec CB-450-975-10 |
10 | 4 1/2" x 9 7/8" |
4 psi @ 4.0 gpm |
9 | ||
| Hydronix CB-45-2001 Part #149452001 Formerly: Liquatec CB-450-20-01 |
1 | 4 1/2" x 20" |
6.5 psi @ 5.0 gpm |
6 | Not Available | |
| Hydronix CB-45-2005 Part #149452005 Formerly: Liquatec CB-450-20-05 |
5 | 4 1/2" x 20" |
4.5 psi @ 7.0 gpm |
6 | ||
| Hydronix CB-45-2010 Part #149452010 Formerly: Liquatec CB-450-20-10 |
10 | 4 1/2" x 20" |
4.5 psi @ 8.0 gpm |
6 | Not Available | |
