Pelican™ PUV-14-SLEEVE (#QSO-410) for PUV-14 Series UV Systems

We are pleased to offer a complete selection of replacement quartz sleeves for all Pelican™ ultraviolet (UV) sterilizers.

The Pelican™ PUV-14-Sleeve replacement sleeve is designed only for use in certain UV sterilizers manufactured by Viqua (formerly R-Can) as listed below. Viqua manufacturers several UV sterilizers on an OEM basis for other companies. This sleeve is the OEM replacement for the Pelican™ PUV-14 .

Pelican™ PUV-14-Sleeve is the sleeve for the following models:

• Pelican™ PUV-14
• Viqua VH410
• Viqua VH410M
• Viqua VH410-F20
• Aquasana™ Sterilight AQ-UV-HIFLOW **
• Aquasana™ Sterilight SC410-A **
• A.O Smith AO-WH-UV ***

Sterilight QSO-410 Specifications

Technical Specifications
Part #	PUV-14-SLEEVE (QSO-410)
Replace Sleeve	every 24 Months or as needed

How to change a Pelican™ PUV-14 Sleeve

1. Turn off water supply valve to UV sterilizer
2. Turn on faucet elsewhere in the home to depressurize the system
3. Disconnect your UV system from power (unplug unit)
4. Allow system to cool for 5 - 10 minutes
5. Follow instructions for removing lamp
6. Remove the top retaining nut & O-ring
7. Remove the bottom retaining nut, Spring and loosen the O-ring to drain the water
8. Remove the quartz sleeve from the UV chamber.
9. Clean the quartz sleeve with a cloth soaked in CLR, vinegar or some other mild acid and then rinse with water.
10. If quartz sleeve can not be cleaned purchase a new sleeve.
11. Re-insert the quartz sleeve with O-ring(s), Spring, and retaining nut(s).
12. Hand tighten the retaining nut(s), taking care not to over-tighten.
13. When service is complete, assemble the prerequisites in the reverse order of disassembly.
14. Turn on water supply valve
15. Check for leaks
16. Close faucet elsewhere in the home

Pelican™ PUV-14-Sleeve (#QSO-410) Reviews

Other Similar Sterilight Sleeves Reviews

Filter & light system
Service was awesome!! And delivered on time as spoken - good product - Hal
Untitled
- Anonymous
Problem rectified
I purchased a UV lamp sterilizer and it was broken upon arrival. I called service and explained the situation and they assisted me and a replacement lamp was shipped free of charge within 3 days. I appreciate this quick response time since I drink the lake water. Thank you. - Carol Hislop

Service was friendly, fast and effecient! - Kevin Bourgeois
Sterilight
Easy to use website. Order accurate and quickly arrived, all was perfect! - Jeff Adam
Not so easy to use
Instructions were not great. Also it would help if the glass had a marker at the top and bottom to ensure proper positioning. Had to redo three times before it would stop leaking. - Doris S
Happy Customer
It's always a pleasure to do business with Home Plus Products. Ordering is easy, products are great, and the shipment always arrives in a timely manner!! Friendly customer service, too. - Al & Wendy

- jim
VIQUA Sterilight Sleeve-QS-001
It solved the problem. Seems to be working fine. - Dory

Pelican™ PUV-14-Sleeve (#QSO-410) Customer Questions & Answers

Question:	Does this come with the O-rings
Answer(s):	Yes, all Viqua sleeves and lamp / sleeve combos come with the necessary o-rings By HomePlus Water on Feb 15, 2024

It is critical that only genuine Viqua manufactured original equipment sleeves be used in your Pelican™ system. It has come to our attention that a number of Chinese manufacturers are making knock-off replica UV sleeves. While they may physically fit in a Viqua / Pelican™ system, they are NOT compatible.