Pelican™ Lamp & Sleeve Combo Kit for PUV-16 Series - #PUV-16-LampSleeve

We are pleased to offer a complete selection of replacement lamps & sleeves for all Pelican ultraviolet (UV) sterilizers.

The Pelican™ PUV-16-LampSleeve replacement lamp & sleeve combo is designed only for use in certain UV sterilizers manufactured by Viqua as listed below. Viqua manufacturers several UV sterilizers on an OEM basis for other companies. This lamp/sleeve combo is also the OEM replacement for the Pelican™ PUV-16.

Pelican PUV-16-LampSleeve is the replacement lamp & sleeve combo for the following models:

• Pelican™ PUV-16 Series
• Viqua UVMax Model E / E4
• Viqua UVMax Model E+ / E4+
• Viqua UVMax Model E4-50+
• Viqua UVMax Model IHS22-E4
• Viqua UVMax PRO 7

Pelican PUV-16-LampSleeve Specifications

Technical Specifications
Part #	PUV-16-LampSleeve (#602810-103)
Lamp	Pelican™-PUV-16-Lamp
Sleeve	Pelican™-PUV-16-Sleeve
Lamp Length	25.5" (65cm)
Lamp Power	67 Watts
Lamp Life	12 Months

How to change a Pelican™ PUV-16-Lamp

1. Turn off water supply valve to UV sterilizer
2. Turn on faucet elsewhere in the home to depressurize the system
3. Disconnect your UV system from power (unplug unit)
4. Allow system to cool for 5 - 10 minutes
5. Put on clean gloves
6. Remove dust cover by squeezing and lifting up
7. Lift lamp connector straight up
8. Remove Pelican™ PUV-16-Lamp from system by unscrewing and lifting straight up
9. Insert new Pelican™ PUV-16-Lamp into the system
10. Screw new Pelican™ PUV-16-Lamp into the system
11. Push lamp connector down onto chamber
12. Attach dust cover and slide over top of chamber
13. Plug in UV system
14. System will beep
15. Hold reset button until system beeps and counter is reset to 365
16. Slowly open water supply valve to UV sterilizer
17. Check for leaks
18. Close faucet elsewhere in the home

Note: The UVMax Pelican™ PUV-16-Lamp is a fluorescent lamp and can be recycled at most hardware stores or your local hazardous waste facility.

Pelican™ PUV-16-LampSleeve (#602810-103) Reviews

Excellent Customer Service
Customer Service beyond expectations. This company has your back and they care. I am not just talking about service when everything goes smoothly.... I am talking about when things go sideways. The customer service team went over the top to even discover that I was having a challenge ...and then they made it their problem to solve. I will buy from this company every time. I have no hesitation in recommending this company to my friends and relatives - something, like this review, I rarely have the privilege of doing - Brian
Good Product
Installed easily, works great. Wonderful customer service, product arrived quickly, and I really appreciate getting a loyalty discount each year when I order. Thank You - BJ Hart

Pelican™ PUV-16-LampSleeve (#602810-103) Customer Questions & Answers

No customer questions have been submitted for this. Have a question? Ask it above.

It is critical that only genuine Viqua manufactured original equipment lamps & sleeves be used in your Pelican™ system. It has come to our attention that a number of Chinese manufacturers are making knock-off replica UV lamps and sleeves. While they may physically fit in a Viqua / Pelican system, they are NOT compatible. Testing of a wide range of these lamps has shown that many do not provide a safe UV dose or offer protection for the stated lamp life, and in some cases have even caused the failure of the ballast/controller and melting of the lamp harness.