• Home >
• Discontinued Products >
• Sterilight SSM-14

Sterilight SSM-14 Ultraviolet (UV) Sterilizer

This item has been discontinued by the manufacturer.
It has been replaced by the Viqua VH410M, which offers a Longer Warranty and a Better Performance.

Sterilight Model SSM-14 Replacement Parts & Accessories

The Sterilight SSM-14 is well suited to point-of-use water treatment and post-RO disinfection up to 2.0 gallons per minute (7.5 LPM) to kill bacteria (including coliform and e.coli), viruses, cryptosporidium, giardia, and a wide range of other microbioogical contaminants. It is the most economical unit that we offer that features a UV intensity monitor and a powered solenoid output. It is an excellent choice for applications with a known bacteria or other microbiliogical contamination problem.

Like all Sterilight Silver Plus Series UV water purifiers, the SSM-14 features a stainless steel reactor chamber, a fire-polished domed quartz sleeve, and Sterilight Sterilume™-EX coated low pressure germicidal UV lamp which can be conveniently changed without interrupting the water flow. The UV lamp provides a 4-log (99.99%) reduction of bacteria, viruses, and protozoan cysts (cryptosporidium and giardia) at the specified maximum flow rates. Lamp life is 9,000 hours (1 year). The SSM-14 uses Sterilight's electronic "ICE" controller features a switchable power supply that automatically detects line voltage between 100-240 volt and adjusts its operating settings accordingly. It also features a convenient display which indicates % UV output, remaining lamp life, and total days of operation. Coupled with a true 254nm UV intensity monitor housed in a stainless steel enclosure, the controller continuously monitors the UV output and warns you of any changes in water quality or if the water becomes unsafe to drink. The SSM-14 also comes with a powered solenoid output that allows you to connect an emergency solenoid valve shut-off kit (sold separately) directly into the controller. See below for more information.

Sterilight SSM-14 Specifications
Applications	point-of-use
Max. Flow Rate (UV dose >30 mJ/cm2)*	2.0 GPM (7.5 LPG)
Max. Flow Rate (UV dose >40 mJ/cm2)*	1.5 GPM (5.5 LPM)
Water Chamber Material	304 Stainless Steel
Chamber Length	15.5 inches / 39.4 cm
Chamber Diameter	2.6 inches / 6.5 cm
Controller Size	8.3 x 3.2 x 2.5 inches (21.1 x 8.1 x 6.4 cm)
Lamp	Sterilume-EX Model S287RL
Sleeve	Quartz Model QS-001
Electrical	100-240v, 50/60HZ
Power Consumption	16 watts
Lamp Power	14 watts
Inlet / Outlet Plumbing Ports	1/4" MNPT
"Power-On" Indicator Light
Audible Lamp Failure Alarm
Lamp Replacement Reminder
LED Display: Lamp Life Remaining, Total Controller Runtime, UV Intensity
UV Intensity Monitor
Powered Solenoid Output
Warranty	Reaction Chamber: 7 years Lamp: 1 year All Other components:2 years

Feed Water Quality Parameters
Iron	0.3 ppm (0.3 mg/L)
Manganese	0.05 ppm (0.05 mg/L)
Tannins	0.1 ppm (0.1 mg/L)
Turbidity	< 1 NTU
Hardness	< 120 ppm (7 grains / gallon)
UV Transmittance (UVT):	75%
Maximum Temperature:	104F (40C)
Maximum Pressure:	125 psi

*Note: Maximum recommended flow rates based on 95% UV transmittance. Actual dosage depends on flow rate, water quality, and maintenance (cleaning ov UV sleeve). UV dosage will be lower when the UV transmittance capacity of the water drops below 95% - if in doubt, select a model rated for a higher flow rate than you actually require. We recommend a UV dose of no less than 30 mJ/cm2.