Viqua 2 Inch Emergency Solenoid Kit #410888-R | List Price: CDN$ Our Price: CDN$7,358.00 You save: $1,298.00 Write a review. Found a Lower Price? Request a Price Beat |
 Lowest Price Guaranteed!If you find a lower price on this product call us or Click here to request a price beat. |
Viqua 2 Inch Emergency Solenoid Valve Kit - #410888-R
Solenoid Shut-off Kit for:
- Model K
- Model K Plus
- Pro 50
- Sterilight S80
- Sterilight SM80
- Sterilight SV50
Kit includes normally-closed 1 Inch solenoid valve and wiring cable. The solendoid valve is NSF/ANSI 372 validated for lead-free compliance, NSF/ANSI 42 and 61 for material safety requirements for drinking water treatment systems, and NSF/ANSI 169 for special purpose food equipment and devices.
In the event of a power failure or electrical outage to your home, your UV lamp in your UV system will lose power. This could leave your home unprotected if someone turns on a water faucet. Some bacteria and other waterborne pathogens can also swim past an un-powered UV lamp and reach the downstream portion of your water system and therefore not receive a dose of UV light once the power is restored. The same situation could occur in the event of a UV bulb failure (rare, but possible). The solenoid emergency shut-off valve kit is installed at the output of your Trojan UV system and will physically close a valve in the event of a bulb burn-out, or power failure, thereby preventing any contaminant from passing through the system untreated. This feature will also turn off the water supply if there is a UV intensity loss.
This kit is highly recommend for all homes installing a UVMax model K, K Plus or Pro 50, or Sterilight model S80, SM80 or SV50 where there is a known bacterial, virus, or cyst contamination problem, or an electrical supply that is prone to frequent outages.
We are pleased to offer a complete selection of accessories for all Viqua UV ultraviolet (UV) sterilizers.
| Technical Specifications | |
|---|---|
| Part #: | #410888-R |
| Fittings: | 2" Female NPT |
