UV Dynamics Model #400129
Replacement Sleeve
UV Dynamics #400129 Sleeve |
List Price: CDN$78.86 CDN$63.00 You save: $15.86!! Choose Option:
Write a review. Found a Lower Price? We price match comparable systems! Request a Price Beat |
![UVDynamics UV Dynamics](/images/uv-dynamics-logo.png)
Guaranteed Genuine UV Dynamics 400129 Original Equipment Sleeve. Don't be Fooled by Knock-Offs!
![UV Dynamics #400129 Sleeve](/images/uv-dynamics-sleeve-400129.png)
- Description
- Specifications
- Related Products
- Installation / Manual
- Reviews
- FAQ
We are pleased to offer a complete selection of replacement quartz sleeves for all UV Dynamics ultraviolet (UV) sterilizers.
UV Dynamics Model #400129 replacement sleeves are designed only for use in UV Dynamics UV sterilizers. We do not recommend that you attempt to use UV Dynamics replacement sleeves in models made by other manufacturers.
UV Dynamics #400129 is the sleeve for the following models:
- UV Dynamics UVD400
- UV Dynamics UVD400/S
- UV Dynamics UVD400E
- UV Dynamics MR400-TP Series
- UV Dynamics MR400E-TP Series
UV Dynamics #400129 Specifications
Technical Specifications | |
---|---|
Part # | #400129 |
Length | 21.02" |
Material | Quartz Glass |
Replace Sleeve | every 24 Months or as needed |
How to change a UVDynamics #400129 Sleeve
Note: Do not touch the lamp or the quartz sleeve with your fingers. Handle by ends only or wear soft gloves.
- Unplug the system from the electrical outlet and turn off all water supplies to the unit.
- Carefully extract the lamp connector from the sleeve glandnut assembly to expose just the top of the lamp. While holding the lamp base firmly, remove the lamp power connector. Caution: lamp base can be very hot - be careful not to drop lamp into quartz sleeve as it easily broken.
- Carefully slide the UV lamp out of the quartz sleeve and discard according to local regulations.
- Remove the quartz sleeve by loosening the glandnut and carefully extracting it from unit. Caution: The quartz sleeve is fragile and is easily chipped or broken - use care when removing or installing.
- Install the new quartz sleeve - replace O-ring if it appears damaged.
- Install new lamp by reversing procedure described above.
- Slowly open water supply valve and purge air from system - verify that there are no leaks before reconnecting to AC power.
UV Dynamics #400129 Sleeve Reviews
There are currently no reviews for this product.
Be the first to write a review.