Enpress ONE Cartridge Tank Filter System - Standard 1.25" Inlet/Outlet
Ideal replacement for small, low capacity plastic housings and expensive commercial stainless steel housings!
Enpress ONE Cartridge Tank Filter System | List Price: CDN$ Our Price: CDN$490.00 You save: $210.00 Write a review. Found a Lower Price? Request a Price Beat |
 Lowest Price Guaranteed!If you find a lower price on this product call us or Click here to request a price beat. |
Note: Cartridges Sold Separately
- Description
- Specifications
- Available Cartridges
- Literature
- Warranty
Description, Features & Benefits
Alternative Part Numbers: CTF8, SCT-125, CW-840, CW-840-1, EF-840-1, 350-ONE-CT-125, 109710, NFS-HF
The Enpress ONE Cartridge Tank is an ideal housing for a wide range of water treatment applications including high flow residential and light commercial applications that would normally require multiple small and inefficient 2 1/2 or 4 1/2 housings, or expensive stainless steel cartridge housings. The Enpress cartridge tank offers extended service life, will never rust, and is far more cost-effective. Moreover, cartridge replacement has never been easier! The Enpress ONE cartridge tank uses a patented industry exclusive "no tools required" snap-ring design for fast and efficient filter changes.
The Enpress ONE Cartridge Tank is available in 2 configurations, the standard model shown here with 1.25 inch inlet/outlet for flow rates up to 60 GPM (max 15 GPM for activated carbon filters), and a high flow capacity version with 2 inch inlet/outlet ports for flow rates up to 150 GPM (sediment filters). See "available cartridges" tab below for a list of cartridge options and specifications.
Features and Benefits:
- high flow rates with limited pressure drop
- much cheaper and easier to install than multiple "Big Blue" housings, and dramatically cheaper than commercial stainless steel housings
- 100% non-metallic - will not rust!
- patented no-tools required snap ring design for fast and easy cartridge replacement
- wide range of sediment and activated carbon filter cartridges available
The Cartridge Tank is NSF 44 and 61 listed and has been tested to 150 psi operating pressure with 4:1 Burst Safety Factor.
Specifications & Operating Conditions - Enpress ONE Cartridge Tank Filter System - 1.25 Inch
| Size: | Approx. 8 Inches in Diameter x 39 3/4 Inches Tall |
| Inlet / Outlet: | 1.25 Inches, Glue Socket |
| Max Pressure: | 150 psi (<90 psi recommended) |
| Pressure Relief Button?: | Yes |
| Made in: | USA |
Typical Installation:
Note: Optional unions, ball valves and drain connections are not included. They can be purchased at any plumbing supply store.
This system is designed for use on all chlorinated and non-chlorinated potable water supplies. It is an excellent choice for larger homes and light commercial settings. If you do not receive your water from a municipal water system (you get your water from a well, lake or other non-treated source), you should have your water tested to ensure it is biologically safe (free of bacteria, viruses, and other harmful microorganisms) before using this filter system as your only water treatment. If your water is biologically contaminated, you should consider a UV sterilizer in addition to this system to kill microorganisms.
Available Cartridges for Enpress ONE Cartridge Tank (Standard Size with 1 1/4" Inlet/Outlet)
Enpress uses colors to identify their various cartridge series. The standard Enpress ONE Cartridge Tank with 1.25 inch inlet and outlet uses the Orange, Green, Yellow, Blue, and White Series cartridge filters.
 Dual Gradient, Double Pleated Sediment Filters |
||
|---|---|---|
| Model | Specifications | Price |
| Enpress CT-10x5 | 10 Micron Outer 5 Micron Inner 50 GPM Max Rec. Flow Rate |
|
| Enpress CT-20x10 | 20 Micron Outer 10 Micron Inner 50 GPM Max Rec. Flow Rate |
|
| Enpress CT-50x20 | 50 Micron Outer 20 Micron Inner 50 GPM Max Rec. Flow Rate |
|
 Dual Gradient, Polypropylene String Outer Filter with a Melt Blown Polypropylene Core |
||||
|---|---|---|---|---|
| Model | Specifications | Price | ||
| Enpress CT-2005-SWMB | 20 Micron Outer 5 Micron Inner 60 GPM Max Rec. Flow Rate |
|||
| Enpress CT-5020-SWMB | 50 Micron Outer 20 Micron Inner 60 GPM Max Rec. Flow Rate |
|||
 Dual Gradient, Double Pleated Filters with Electropositively-Charged NanoAl Media |
||||
|---|---|---|---|---|
| Model | Specifications | Price | ||
| Enpress CT-20xNanoAl-AG | 20 Micron Outer as low as 0.2 Micron Inner 60 GPM Max Rec. Flow Rate |
|||
| Enpress CT-20xNanoAl-PAC-AG | 20 Micron Outer as low as 0.2 Micron Inner 60 GPM Max Rec. Flow Rate |
|||
 Carbon Block (Coconut Shell Carbon) |
||||
|---|---|---|---|---|
| Model | Specifications | Price | ||
| Enpress CT-03-CB | Improves Taste/Odor, Removes Chlorine Life: >250,000 gallons at 90% removal at 2 ppm Chlorine 3 Microns 15 GPM Max. Rec. Flow Rate |
|||
| Enpress CT-20-CB | Improves Taste/Odor, Removes Chlorine Life: >150,000 gallons at 90% removal at 2 ppm Chlorine 20 Microns 7 GPM Max. Rec. Flow Rate |
|||
| Enpress CT-03-CB-AMINE | Improves Taste/Odor, Removes Chloramine Life: >50,000 gallons at 85% removal 3 Microns 7 GPM Max. Rec. Flow Rate |
|||
 Empty Shell Cartridges - Add Your Own Media! Upflow or Downflow |
||||
|---|---|---|---|---|
| Model | Specifications | Price | ||
| Enpress CT-MEDIA05 | Single 0.5 CF media chamber, upflow or downflow service, featuring Enpress Vortech technology | |||
| Enpress CT-MEDIA05-MID | Two 0.25 CF media chambers, upflow or downflow service, featuring Enpress Vortech technology and Mid-Vortech separation plate | |||
Literature & Resources
 Enpress ONE Cartridge Tank Brochure |
 Enpress ONE Cartridge Selection Guide |
Manufacturer's Warranty
Enpress LLC (the manufacturer) warrants to the original owner (under normal use) to be free from defects in material and/or workmanship for one (1) year from the date of purchase.
