Pentek RFC-93 Water Filter (#155063-43)

Description, Features & Benefits

Specifications:
Manufacturer/Brand:	Pentek
Filter Series:	RFC
Part Number:	155063-43
Alternate Part Number(s):	15506343
Type:	Carbon - Granular Activated Carbon (GAC)
Material(s):	Activated Carbon
Size:	2 3/4 x 9 3/4 Inches (70 x 248mm)
Micron Rating:	7 (Nominal)
Pressure Loss:	0.6 psi @ 1 GPM
Validation:	NSF42
Specifications Sheet:	Pentek RFC Series Specs

RFC-93 cartridges are constructed with a 70-micron porous polyethylene outer shell and durable polypropylene end caps. The 2-3/4" OD cartridges have a polypropylene core and the 4-1/2" OD cartridges incorporate a spun polypropylene core. Sandwiched between the outer shell and the core is a bed of granular activated carbon (GAC).

The unique radial flow design offers the benefits of granular activated carbon (GAC) filtration, such as low pressure drop, while at the same time significantly reducing the release of carbon fines commonly associated with GAC style cartridges.

• Provides effective chlorine taste & odor reduction
• Unique design reduces carbon fines in filtered water

In Series Filters

We do not currently have any recommended alternatives to this filter.

Pentek RFC-93 Reviews

Reviews from the same Filter Series

High Flow
I used this filter to replace my old carbon filter in my whole house system. The old filter restricted flow. This one does not seem to at all and it works great on the chlorine taste and smell. - Cara H
Water Filters
Satisfied with product. - Richard W
Untitled
Eliminates the smell and taste of chlorine, also filters sediment very effectively. Had this filter system for approx 10 years, and it continues to meet my needs. - Doug
Water filter
- Roger D

- Claude Veilleux

- Doug Mercer
Great Filter
Look no more. this filter worked for me as advertised. - Steve S.
It's a filter
It appears to work like the other more expensive one I used to buy. - Carey
Works perfectly!
I was worried I was never going to find the right filter to fit our Aquativa water system once the company we used to use went out of business. I search the internet and happen to find Home Plus Water. I spoke with one of their Aquativa specialist and she was so helpful in finding a close match to the one we used to use. When it arrived my husband installed it and it works perfectly! It’s even better than the previous one! Thank you for saving us! - Phoebe Coble

Pentek RFC-93 Customer Questions & Answers

Question:

How long do I run the water after changing the filter?

Answer(s):

After you change a carbon filter, you should generally run water for about 5 minutes after it is installed. All carbon filters contain some "fines." These are basically tiny pieces of fine carbon that will be flushed out of the filter when it is first put into service. This is why the first little bit of water that comes out of a new carbon filter often looks grey or even black. These are usually flushed away in the first 30 seconds or so, but running a bit longer will ensure they are all flushed out before you start using your filter. By HomePlus Water on Aug 22, 2024