Pentek ST-2 20" Inch Stainless Steel Housing - #156018-02
Pentek Pentek ST-2 20 Inch | Our Price: CDN$697.91 Write a review. Found a Lower Price? Request a Price Beat |
 Lowest Price Guaranteed!If you find a lower price on this product call us or Click here to request a price beat. |
Part #: 156018-02
The Pentek ST-2 stainless steel filter housing provides heavy duty filtration for smaller filtration systems and point-of-use applications. Supplying flow rates of up to 15 gpm (57 Lpm) at a maximum water temperature of 300F (149C), the ST-2 housing is ideal for hot water and high-pressure applications that are not appropriate for plastic housings.
The brushed 304 stainless steel sump is available with either a pipe plug or petcock in the bottom for draining. Heads are manufactured from nickel-plated cast-brass. ST Series Housings are easy to install and maintain. They are compatible with a wide range of filter cartridges, adding to their versatility.
Uses standard 20" long filter cartridges.
- brushed 304 stainless steel sump
- nickel-plated brass head
- rated to a maximum pressure of 250 PSI (17.2 bar)
- rated to a maximum water temperature of 300F (149C)
NOTE: Maximum cartridge diameter is 3" (76 mm). Will not accept GAC, CC, CGAC, TSGAC, WS, PCF or PCC Series cartridges. Not recommended for applications with TDS or chlorides >1000 ppm and/or pH <5.0. Use of this product in these conditions will void the warranty.
| Features & Specifications: | |
|---|---|
| Sump Material: | brushed 304 stainless steel |
| Head Material: | nickel-plated brass |
| Inlet / Outlet: | 3/4" FNPT |
| Temperature Rating: | 40-300F (4.4-149C) |
| Pressure Rating: | 250 psi (17.2 bar) |
| Dimensions: | 22.75" x 4.13" (578 x 105 mm) |
| Flow Rate: | 15 gpm (57 Lpm) |
| Gasket / O-Ring: | part #143216 |
Other Pentek ST Series Stainless Steel Housing Options:
Pentek ST-1 10" Stainless Steel Housing
Pentek ST-3 30" Stainless Steel Housing
