Pentek ST-3 30" Inch Stainless Steel Housing - #156019-02
![Pentek Pentek ST-3 30 Inch <br>Stainless Steel Housing - #156019-02](/images/ST-3.png)
Discontinued
Pentek Pentek ST-3 30 Inch |
The Pentek Pentek ST-3 30 Inch Stainless Steel Housing - #156019-02 has been discontinued by the manufacturer. |
Part #: 156019-02
The Pentek ST-3 stainless steel filter housing provides heavy duty filtration for smaller filtration systems and point-of-use applications. Supplying flow rates of up to 30 gpm (76 Lpm) at a maximum water temperature of 300F (149C), the ST-3 housing is ideal for hot water and high-pressure applications that are not appropriate for plastic housings.
The brushed 304 stainless steel sump is available with either a pipe plug or petcock in the bottom for draining. Heads are manufactured from nickel-plated cast-brass. ST Series Housings are easy to install and maintain. They are compatible with a wide range of filter cartridges, adding to their versatility.
Uses standard 30" long filter cartridges.
- brushed 304 stainless steel sump
- nickel-plated brass head
- rated to a maximum pressure of 250 PSI (17.2 bar)
- rated to a maximum water temperature of 300F (149C)
NOTE: Maximum cartridge diameter is 3" (76 mm). Will not accept GAC, CC, CGAC, TSGAC, WS, PCF or PCC Series cartridges. Not recommended for applications with TDS or chlorides >1000 ppm and/or pH <5.0. Use of this product in these conditions will void the warranty.
Features & Specifications: | |
---|---|
Sump Material: | brushed 304 stainless steel |
Head Material: | nickel-plated brass |
Inlet / Outlet: | 3/4" FNPT |
Temperature Rating: | 40-300F (4.4-149C) |
Pressure Rating: | 250 psi (17.2 bar) |
Dimensions: | 32.38" x 4.13" (823 x 105 mm) |
Flow Rate: | 20 gpm (76 Lpm) |
Gasket / O-Ring: | part #143216 |
Other Pentek ST Series Stainless Steel Housing Options:
Pentek ST-1 10" Stainless Steel Housing
Pentek ST-2 20" Stainless Steel Housing